Is it easy to create a boat design?

People have this curiosity in them to know how hard it is to build a boat. It is necessary to know that there are different levels for building a boat, some are extremely easy and some are extremely difficult.
	
The first and foremost thing we check is the line of the boat. If the boat has a circular bottom than it would be a tough boat to build and it’s simply the other way around in case of flat curves.

The next thing we need to consider is the hull of the boat. We can use CAD that is Computer Aided Design to avoid any sort of incorrectness in the design. The moment we build everything in harmony with the drawing, the hull automatically would fall in place.

Now, if you want to build a modern boat, all you need to know is how to read a tape and make marks with pencils.
Next in line comes the skill of cutting a straight line with a handsaw. For this you can use circular saw, table mint saw, table saw, power mint saw and even radical arm saw. This job is not very tedious all you need to do is be a little careful while cutting.

You should also know how to use and set up a power plane, drawknife, hand plane and disk sander. This activity requires more of intuition than skill. Also drilling holes and using wireless screwdrivers should be your forte. 

Finally what matters is how you blend the epoxy. Even this does not require much of skill just your capability of following directions.  Epoxies should be blended in right proportions to heal appropriate with complete force.

This is all one needs to make your own boat. It might sound false but that’s actually about it. Now in the end one has to believe that there is nothing magical in building a boat.