Design That Perfect Hull

Every boat has a hull which is the most important part of the boat. The hull may come in various shapes and sizes and with different material like wood, fiber glass, steel or aluminum.  The choice of the hull should be made according to the type of boat you need.

Hulls always vary from each other either in size, shape, material or weight.  A wooden boat would have a different hull design from that of a steel one.  When selecting the design of the hull care should be taken to check the right weight to suit the size of the boat.  This enables the buoyancy of the boat which in turn would give you a pleasurable boat ride rather than a traumatizing one.

For instance, if you are designing a ballasted boat the weight of the counterbalance should be on a 50-50 basis and not exceed this limit.  This in turn would allow the boat to be dipped inside the water just enough to float and not sink.  If the hull is heavier than its required weight it surely would sink as soon as it is dipped in the water.

Suppose you want to design the perfect hull for a racing boat the calculations should be very accurate.  You should design the hull leaving at least 3 stakes of separation.  If this is not done then there are chances that your boat would sink in the water since it becomes unbalanced.

If your boat is a small or a medium one then you should allow the freeboard to be approximately 10% of the load waterline known as the LWL. Small or medium sized boats are a pleasure to maneuver and easy to handle.

You should take precautions to design that perfect hull when planning your boat design.  The hull is the most important part of the boat and it should be given much priority in structure, shape and design. If the hull is perfect the rest of the boat is child’s play.

It is highly recommended to make use of the boat design software to choose the right hull with the precise calculations and curves and bends.  With a boat design software you would never go wrong and you definitely can design that perfect hull.

With the boat design software you not only get different templates of boats and hulls, but it is very user friendly and gives you a step by step manual to design not only the hull but the whole boat.  You could then export the design to the AutoCAD software where you could make a blueprint of it for the boat builder.